DS2413P+ 1-Wire Dual Channel Addressable Switch

Be the first to review this product

44 in stock
£1.56
OR

Quick Overview

DS2413P+ 1-Wire Dual Channel Addressable Switch

8leg.jpg

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 8leg.jpg

Details

Description

The DS2413 is a dual-channel programmable I/O 1-Wire® chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire I/O and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim 1-Wire serial interface.

Key Features

  • Open-Drain Programmable I/O Pins
  • PIO Pins Support 20mA max Continuous Current Sink
  • Supports 28V (max) PIO Pin Operating Voltage
  • On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min
  • Parasitic Power Supply Through 1-Wire
  • Communicates to Host with a Single Digital Signal at 14.9kbps or 100kbps Using 1-Wire Protocol
  • Unique 64-bit ROM Serial Number Factory Lasered Into Each Device
  • Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
  • 1-Wire I/O Pin Supports 28V Absolute Maximum DC Level for Fault Conditions
  • Operates Over a Wide 1-Wire Voltage Range of 2.8V to 5.25V from 0°C to +70°C
  • High ESD Immunity of 1-Wire I/O Pin: 8kV HBM Typical
  • TSOC package

Datasheet available here.

Additional Information

Delivery Normally delivered from stock
SKU hc00126
Technical Information No additional technical information available.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.