Link locator model #1

Be the first to review this product

5 in stock

Quick Overview

Link locator model #1


Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • link-locator-1.jpg



The LinkLocator sends its own unique 16 digit address, along with the 16 digit address of the iButton being discovered on the 1-wire network. While the ability to read iButton information and reader location is not new, the ability to identify multiple reader locations for under £12 each is. The LinkLocator provides additional functionality, such as LED drivers and digital I/O points, when used with any one of the Link 1-wire master interfaces offered by iButtonLink, LLC.

The LinkLocator Model 1 is packaged as a small cylinder (12mm dia. by 36mm long) with leads exiting from one end. It can be mounted with a simple cable clamp, cable tie, or secured in an electrical box. The electronics are encapsulated in a potting compound, making the device nearly water proof and highly resistant to chemicals. Very useful in situations where the reading devices are pre-existing.

Additional Information

Delivery Normally delivered from stock
SKU hc00004
Technical Information No additional technical information available.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.