2 Channel Digital I/O 1-Wire Card

Be the first to review this product

121 in stock

Quick Overview

2 Channel Digital I/O 1-Wire Card wit or without pullups and connectors


Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • D2PC

* Required Fields




The D2, 2 channel digital I/O expansion card, provides two I/O channels which can individually be configured as a digital input with latch or a high current sink digital output. Digital input and output functions can coexist.

The D2 has a built-in multidrop controller (DS2406) which provides a unique 64 bit registration number (8-bit family code + 48 bit serial number + 8 bit CRC) assuring error-free selection and absolute identity; no two parts are alike. Unique addressing allows I/O function to be identified absolutely, no more dip switch address confusion. Status input, latched-input-activity and output-latch functions allow input, output and fast event catch functionality to hundreds of I/O points on a 1-Wire bus. The DS2407 provides the digital I/O functions. The I/O connector is marked "A" I/O position one, "G" common ground returns, "B" I/O position two.

The D2 is designed to allow a network of input and output modules to operate on a two or three wire bus, power("+"), common("G") and data("D"). The D2 can be powered locally or the power may be bussed with the 1-Wire signal in a three wire system. The bussed power must be regulated 5V.

The D2 is compatible with EDS OneSix DDE server and family of 1-Wire enabled devices, as well as any 1-Wire host with support for the Dallas Semiconductor DS2406 Dual Addressable Switch and EDS Analog.

The D2 is available in 4 variants:

  • D2 - no connector or pull-up resistor
  • D2C - screw connector
  • D2P - onboard pull-up resistor
  • D2PC - screw connector and onboard pull-up resistor


  • 2 channels each configurable as either digital input, or digital output.
  • All data transfers are CRC16 error checked.
  • Digital outputs, (A) sink 50-mA., (B) sink 8-mA.
  • Digital inputs are latched until read.
  • Built-in multidrop controllers, (DS2407).
  • CAT-5 twisted pair up to 600m, 200 devices.
  • Uses 1-Wire Communication Protocol.


  • Supply Voltage: 4.5 - 5.5 Volts
  • Supply Current: 3 - 8 mA
  • Output Sink Current (A Position 1): 50 (see DS2406) mA
  • Output Sink Current (B Position 2): 8 (see DS2406) mA

Additional Information

Delivery Normally delivered from stock
SKU cfg0009
Technical Information No additional technical information available.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.