HomeChip

WTAIN-M Programmable Analog Input
[hc00151]

£82.85

Description

Connects to the RS-232 serial port or USB adapter on a PC, laptop, or other host. Simple command strings sent from the host will read the voltage at the input channels. The value returned to the host can be shown as a voltage, or programmed by the user for any other engineering units desired. The readings can also contain a decimal point if needed, the position programmable by the user. Interface directly with pressure transducers, load cells, strain gages, temperature sensors, 4-20 mA devices, potentiometers, etc. Ideal for direct data acquisition applications without requiring data conversions at the output.

Features

4 differential input channels with a ±10V common mode range and protection to ±40V.
3 factory calibrated modes: +10.000 V to -8.000 V, ±600.0 mV, and ±600.00 mV.
2 user programmable modes which display readings in direct engineering units of choice.
User programmable decimal point position.
20-bit A/D converter provides resolutions down to 1.4 µV (user programmable modes).
8-times averaging smoothes out readings.
5-Volt excitation output for bridge sensors.
Software calibrated; no trim-pots to adjust.
All user configuration and calibration data stored in non-volatile memory.
DIP switch addressable; stack up to 32 modules on the same serial port for 128 differential input channels.
Industry standard RS-232 interface. Meets all EIA/TIA-232E and V.28 specifications.
Wide power supply range (15 to 30 VDC).

Questo prodotto è stato aggiunto al nostro catalogo il Wednesday 20 May, 2009.

TEXT_ENTER_QUANTITY:

I clienti che hanno questo preso quest prodotto lo hanno anche comprato?????

USB 2.0 to RS232 Adaptor + 1M Cable	DS1402-RP8+ Touch and hold probe to RJ11 (240cm length)	DS9490B - USB 1-Wire / iButton Adapter (integral ibutton holder)
DS9490R - USB 1-Wire / iButton Adapter (RJ11)	DS1402-RP3+ Touch and hold probe to RJ11 (90cm length)	WTDIN-M Digital input module