Snap Card Modules
Embedded Data S..
MN-ENV-TPR - Temperature and Pressure Sensor (wireless) with rel
Use keywords to find the product you are looking for.
Manuals & Data Sheets
Shipping & Returns
Conditions of Use
Click to enlarge
The MeshNet Controller is the gateway between the proprietary MeshNet Wireless Sensor network and the outside world. The MeshNet Controller provides the means to viewing data in real time, configuring Wireless sensors, and a variety of administrative functions. Up to 35 wireless devices can be connected to a MeshNet controller's wireless network and coexisting MeshNet Networks are supported. The MeshNet Controller also provides simple structures for integrating the MeshNet Wireless System into 3rd party monitoring and control applications using SNMP, SNMP Traps, HTTP or HTTP Post. More details for software developers are available in the User Manual.
Communication Hub MeshNet Wireless System
Supports HTTP, HTTP Post, SNMP & SNMP Trap protocols
Globally unique 64-Bit serial number.
User configurable parameters.
Proxy server support
Real Time Graphing & Logging through web interface
Robust Communication protocol.
Universally accepted 2.4Ghz radio frequency.
Support up to 35 nodes (Sensors/Repeaters)
Complies with FCC, Industry Canada and CE Marking requirements
Diagnostic Transmission Data
The web interface also provides a straightforward method for configuring MeshNet hardware and a graphing interface which allows for the easy monitoring of sensor data in real-time. Individual sensor pages allow for up to 3 parameters to be displayed for any one sensor. The overview pages allow all sensors reporting a selected parameter to be graphed together. Graphing data can then be easily exported for more in depth analysis with the click of the "Download" button.
Linking Sensors and Repeaters
Each MeshNet repeater and sensor (nodes) requires a physical connection to the Controller in the initial setup (linking). The linking process allows the node and controller to exchange necessary information for joining the unique Wireless network which also enables multiple MeshNet wireless networks to coexist. Nodes can switch MeshNet wireless networks through repeating the linking process with the new wireless network’s controller. The Plug-n-Play linking process is completed by following the simple steps below:
Take the supplied 3.5mm linking cable and attach it to the MeshNet Controller.
Attach the remaining 3.5mm plug and attach it to the MeshNet Repeater/Sensor.
Apply Power to the Controller followed by the Repeater/Sensor.
Wait for the LED to quit blinking. (It will take approximately 5 seconds.)
Disconnect the linking cable from the Repeater/Sensor and Controller
This product was added to our catalog on Friday 21 December, 2012.
Customers who bought this product also purchased
OW Environmental sensor Temp/Humidity
OW Environmental sensor Temp/Humidity/Light/Pressure Relay
DS9490R - USB 1-Wire / iButton Adapter (RJ11)
MN-ENV-T - Temperature Sensor (wireless)
MeshNet Repeater (High powered)
LinkUSBi - 1-wire controller with identity
Embedded Data Systems Homepage
Notify me of updates to
Tell A Friend
Tell someone you know about this product.
Write a review on this product!
Tuesday 21 May, 2013
4811860 requests since Wednesday 11 July, 2007
Copyright © 2013