DS1922T-F5 thermochrons (high capacity) 0 to +125C

Be the first to review this product

DS1922T-F5 thermochrons (high capacity) 0 to +125C is out of stock
  • Buy 10 for £73.43 each and save 6%
  • Buy 25 for £69.47 each and save 11%
  • Buy 50 for £65.70 each and save 16%
  • Buy 100 for £61.84 each and save 20%

Quick Overview

DS1922T-F5 thermochrons (high capacity) 0 to +125C

DS1922T-F5 thermochrons (high capacity) 0 to +125C

Double click on above image to view full picture

Zoom Out
Zoom In

More Views



The DS1922T temperature logger iButtons® are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922T is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1922T is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1922T to be mounted on almost any object, including containers, pallets, and bags.

Special Features

  • Automatically Wakes up, Measures Temperature and Stores Values in 8kB of Datalog Memory in 8- or 16-Bit Format
  • Digital Thermometer Measures Temperature with 8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution
  • Accuracy of ±0.5°C from +20°C to +75°C (DS1922T) with Software Correction
  • Sampling Rate from 1s up to 273hrs
  • Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point
  • Programmable High and Low Trip Points for Temperature Alarms
  • Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function
  • 512 Bytes of General-Purpose Plus 64 Bytes of Calibration Memory
  • Two-Level Password Protection of All Memory and Configuration Registers
  • Communicates to Host with a Single Digital Signal at up to 15.4kbps at Standard Speed or up to 125kbps in Overdrive Mode Using 1-Wire Protocol
  • Operating Range: 0 to +125°C

You may also be interested in the following product(s)

TDHC 400 thermochron reader

TDHC 400 thermochron reader


Additional Information

Delivery Normally delivered from stock
SKU hc00072
Technical Information

Full datasheet available here.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.