Plasterboard temp/humidity sensor

Be the first to review this product

19 in stock
£36.56
OR

Quick Overview

Plasterboard temperature/humidity sensor

Plasterboard temp/humidity sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Description

Introducing a temperature and humidity sensor fit for your walls. This multi-use 1-Wire® based sensor can be embedded into walls or fixtures using the simple insert design. The case has a threaded wall holder that can be driven into plasterboard (gypsum board) with a few twists, allowing the sensor body to slide in and be almost flush with the wall. The front has a small opening for the sensor to measure the temperature and humidity, this opening should never be covered or filled. The sensor comes with pre-stripped 18AWG wires for easy connection via wire nuts.

The SS-WALL-TH uses iButtonLink smart sensor technology to embed a microprocessor into a 1-Wire® sensor, allowing for more accurate sensing abilities than in other 1-Wire® humidity sensor designs.

The sensor has a temperature sensing range of -40 to +85 C, with a typical accuracy of ± 0.3 degrees C and a max error of ± 0.5 degrees C.

The sensor will work in 0-100% relative humidity, non-condensing. The sensor does have a HDPE cover to protect from occasional condensation, frequent condensation is not recommended. The humidity sensor is accuracy is typically ± 2% and max ± 3.5% from 0-80% RH with a max error of ± 5% above 80% RH. For more information on the SS-WALL-TH Temperature and Humidity Sensor, please visit here.

Like all silicon based humidity sensors, the SS-WALL-TH does drift over time, and can be adversely affected by continuous exposure to very humid, or very dry, environments. The low maximum drift of 0.5% RH per year allows the sensor to be deployed for a longer time than other silicon humidity sensors before calibration or testing.

Additional Information

Delivery Normally delivered from stock
SKU hc00294
Technical Information

Basic data sheet available here.

User manual here.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.