WTDAC-M Analogue Output Module

Be the first to review this product

3 in stock

Quick Overview

WTDAC-M Analogue Output Module

WTDAC-M Analogue Output Module

Double click on above image to view full picture

Zoom Out
Zoom In

More Views



  • 4 analog output channels that span -10.00 to +10.00 volts each.
  • 12-bit DAC provides 0.01-volt output resolutions.
  • Automatic generation of trapezoidal and S-curve slope profiles.
  • User adjustable ramp-rate and S-curve magnitude.
  • Individually selectable power-up / reset voltages for each output channel.
  • Software calibrated; no trim-pots to adjust.
  • All user configuration and calibration data stored in non-volatile memory.
  • Separate RESET and PAUSE switch inputs.
  • Industry standard RS-232 interface. Meets all EIA/TIA-232E and V.28 specifications.
  • Screw-terminal connectors used on all inputs and outputs.

Connects to the RS-232 serial port of a PC, laptop, or other host. Simple command strings sent from the host will set distinct DC voltage levels at the output channels. This voltage can be used for control of industrial equipment requiring a 0 to 10 VDC unipolar or bipolar control signal, as well as other uses. A built-in ramp generator is included. A change in voltage on an output can be configured to update immediately, or follow a slope at a user defined ramp rate. An external pause switch can suspend execution of a voltage slope at any point along the way for review or data collection. This module is ideal for complex multi-point cyclic operations without relying on host for timekeeping or conversion calculations.

Additional Information

Delivery Normally delivered from stock
SKU hc00096
Technical Information

Full datasheet available.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.